Among the most fascinating techniques of craftwork, glassblowing represents a perfect balance between technical gesture and artistic sensitivity. It is an ancient knowledge, passed down through the centuries, that still fascinates today for its ability to transform a solid material like glass, using fire and air. In this article, we guide you through the discovery of this extraordinary art, its history, the steps to follow, and we illustrate the necessary tools.
But what exactly is it?
Glassblowing is an ancient technique of glassworking that consists of inflating molten glass, through the blow of the glassmaker – or rather, the glassblower – and shaping the glowing mass as if it were a balloon.
There are no moulds or guides: it is a freehand technique, where the eye of the master makes the real difference. Only experience can tell how much to blow, when to rotate, how to cool. Every gesture is calculated, but always open to surprise.

An art that comes from afar
Blowing was born over two thousand years ago, around the 1st century BC, in the regions of Syria and Lebanon. The Phoenician glassmakers were the first to discover that by blowing into molten glass, they could obtain light, wide, and thin shapes, never seen before. This technique then travelled through time, finding an ideal home in Murano, where it became a true school.
How does it work?
The process is a small fire ritual, to be experienced slowly and with concentration:
- Borosilicate tubes, more commonly known as Pirex, are used.
The glass is softened at around 1400°C, thanks to a flame composed of a mixture of propane gas and oxygen that comes out of a torch.
- At this point, freehand work begins, using a few tools and the artist's breath.
- Blow into the tube, inflating the mass like a small balloon.
- With specific tools – pliers, shears…– shape the form, adjusting proportions and creating details.
- Finally, you will need to wait for the object to cool.

What can you create?
Literally… anything! From glasses to sculptures, from lampshades to decorative spheres. Some blowers work on classic shapes, others on contemporary designs. Every piece is unique and unrepeatable.
What do I need?
In addition to glass and protective devices such as glasses and gloves, we list below the technical equipment you need.
As it involves professional material, we recommend assembling it under the supervision of a qualified technician.
The diagrams below are purely illustrative: they serve only to identify the necessary components and to show generally how they can be connected.
They do not replace a technical project in any way and do not authorise proceeding without the support of a qualified professional.
Here are two practical installation guides:
Connecting the torch with the oxygen cylinder
- LPG cylinder
- Regulator with manometer #10050
- Safety valve #10052
- Hose holder
- LPG rubber tube #10815/ OXG #21136(at least 1.5m per section)
- LPG non-return valve #10054
- Torch
- OXG non-return valve #10053
- OXG safety valve #10051
- Regulator with manometer #10049
- Oxygen cylinder
- Stainless steel sealing clamp #10059 to be applied to the tube after attaching it to the hose holder (2 pcs).

Connecting the torch with the concentrator
- LPG cylinder
- Regulator with manometer #10050
- Safety valve #10052
- Hose holder
- LPG rubber tube #10815/ OXG #21136(at least 1.5m per section)
- LPG non-return valve #10054
- Torch
- Oxygen concentrator #5352112.Stainless steel sealing clamp #10059 to be applied to the tube after attaching it to the hose holder (2 pcs).

Choosing the torch
In addition to all the technical connections, you will need to choose the torch that best meets your needs.
If you wish to create small items, we recommend using the Mega Minor or Bethlehem Alpha models.
If you want to create glasses, vases, sculptures… we recommend the Prometheus T2 or Bethlehem Bravo models.
What are the essential tools?
As mentioned, you will need tools such as pliers, scissors, supports, and protective devices.
Let’s get to know them in detail!!

Protective devices
It is recommended to use heat-resistant gloves according to your experience, but it is absolutely mandatory to equip yourself with specific glasses for the work you are performing.
In the market, there are two types: for Pirex (borosilicate) and for Murano. They are different because they must be chosen based on the nature of the light emitted during processing and the optical effects to counteract to adequately protect the eyes.
Essentially, glasses for Pirex contain filters that block the intense yellow light emitted by the flame during borosilicate processing, thus reducing glare and allowing clear visibility of the glass; those for Murano protect against UV and IR rays and also help preserve colour rendering, thus avoiding visual fatigue.
Utensili
Indispensable are the tools that bring to life the objects you are designing. Without them, you will not be able to handle the hot and soft glass. Below we list the main ones and a brief description of their use:
Drilling pliers: allow you to easily drill pendants, buttons, or other items when the glass is still hot.
Borsella pliers: equipped with a diamond tip, used to make marks on goblets or cups that will allow for clean cuts.
2-wheel support: useful for holding rods during processing. The wheels can be positioned more or less spaced apart, depending on the diameter of the tube or rod that will be used.
Why love this art?
Blowing glass means coming into contact with one of the oldest forms of craftsmanship. It is a practice that teaches the value of time, attention to detail, and at the same time, the beauty of imperfection that makes your creation a unique piece in the world.
If you are looking for a new creative technique, this might just surprise you.
Every object you create will tell a story, and we can't wait to hear yours!









