Leather carving, or more precisely, leatherwork, is a decorative technique based on creating designs and patterns on leather with the help of swivel knives, chisels, and gouges. Carving is ideal for personalising belts, wallets, bags, or other leather accessories, but with the right tools and your creativity, you can create any type of artistic and decorative project.
In this guide, we will explore the materials and tools needed for leather carving and the basic techniques to realise your project.
The first step, of course, is the raw material: leather. The term leather refers to animal hide treated with tanning, which has optimal characteristics for working. Remember: when we talk about “leatherwork”, even if it is not specified that it is leather, we are almost always referring to this specific type of hide. For more information on leather and how to choose the right one for your project, we recommend reading our leatherworking guide.
Tools for leather carving
As mentioned at the beginning, the main tool you will need is a swivel knife that will allow you to carve the leather with smooth and controlled movements. You can choose different types of blades for your knife: the steel blade is certainly the most durable, but it needs to be sharpened periodically for optimal use; the ceramic blade does not require sharpening, but it is also more fragile and can break easily if dropped or struck. The ruby blade, particularly valuable, ensures an easy and smooth cut on the leather.
Most knives available on the market have interchangeable blades and are adjustable, allowing them to fit any hand.
As mentioned at the beginning, the main tool you will need is a swivel knife that will allow you to carve the leather with smooth and controlled movements. You can choose different types of blades for your knife: the steel blade is certainly the most durable, but it needs to be sharpened periodically for optimal use; the ceramic blade does not require sharpening, but it is also more fragile and can break easily if dropped or struck. The ruby blade, particularly valuable, ensures an easy and smooth cut on the leather.
Most knives available on the market have interchangeable blades and are adjustable, allowing them to fit any hand.
To keep your knife sharp, especially before starting the carving, you will need a sharpening kit, consisting of:
- the work surface, made up of a wooden base covered with a layer of leather;
- the sharpening roller, to be rubbed on the rough side of the leather (the “flesh” side, opposite the “grain” side, which is the smooth side where the carvings are made);
- a holder to help you keep the blade at the right angle during sharpening.
Another tool we recommend you acquire is the mini-gouge, particularly one with a stylus tip and one with a spoon tip. The first will be useful for transferring the design onto the leather before you start carving, and the second for finishing the work by giving more roundness to the clean grooves created by the knife. Both mini-gouges have a comfortable grip and come with two tips of different sizes to suit every need.


You will also need chisels to refine the design, create depth, and add patterns to your decoration, along with a specific hammer for using the chisels.
The last thing you need – but not in order of importance! – is the design or decorative pattern you intend to carve.
If you are a beginner with this technique, you can use ready-made patterns easily found in books and guides on leather carving. Alternatively, if you prefer to unleash your creativity, you can draw your project independently and freehand. Once finished, transfer the design onto a sheet of glossy paper or paraffin paper to make it easier to trace onto the leather.

The leather carving technique
The process begins with the preparation of the leather, which should be dampened with water. It does not need to be soaked; just a few passes on both sides with a wrung sponge will make the leather softer, more elastic, and easier to work with.
Immediately after, you can proceed with transferring your design onto the leather: apply the tracing film on the surface and, with the help of a mini-gouge, trace the lines onto the leather. You can use adhesive tape to secure the glossy paper to the leather and prevent it from shifting. We recommend using clear tape in this case because its adhesive is strong enough to hold the design in place but not so strong as to damage the surface of the leather.
Once the design is traced, it’s time to carve. It is advisable to start immediately after finishing the drawing to avoid the leather drying out too much and losing its elasticity. If necessary, you can pass a damp cloth to moisten it again.
Hold the swivel knife so that it is vertical on the leather, with your index finger resting on the bracket at the top of the knife. This grip will allow you to move the blade smoothly over the leather, following the lines of the design in all its curves. Try to maintain a constant pressure to carve in uniform strokes. If the design is complex, we recommend starting from the edges and the outer lines, working your way inward.
Once the design is complete, you can begin with the finishing: creating thicknesses, rounding the edges, adding details and decorative elements.

The chisel is the star of this phase. With a set of chisels with different tips, you can create all the details and effects of three-dimensionality you desire. Wide tips will help you remove excess leather and carve deeper grooves, while smaller blades will allow you to refine details and carve thin lines. Before starting work with the chisel, moisten the areas of leather you will be working on with a brush. Place the tip of the chisel on the leather and, with the help of a small hammer, gently proceed along the lines you wish to refine.
Mini-gouges are also very useful in this phase of refinement, as they allow you to create roundness in the grooves, especially those with a U-shaped tip. To create more depth in the design, you can use a flat-tipped background chisel that will help you flatten the areas around the design.

Once you have finished the work in terms of lines, depths, and volumes, it’s time for decoration. The chisels are once again among the essential tools for this work: geometric chisels or pear shader chisels end with shapes or designs, rather than just a simple tip, and are used under pressure – always with the help of the hammer – to imprint designs on the leather and create patterns, motifs, and recurring elements.
With one of our leather carving kits, you will have an essential set of tools and chisels to start your adventure in leather carving.
At this point, all that remains is the finishing. Leather is, in fact, an organic material and naturally subject to wear or aging, so it is worth protecting your creation by using, for example, waxes or other protective or waterproofing products. And if you decide to dye, we have the right guide for you, entirely dedicated to dyeing leather!
Resources and guides on leather carving
Leatherworking, including carving, has a long history and many styles and techniques inspired by different traditions. If this practice is your passion, or if you have decided to further explore the world of leather carving, we can recommend some books and guides on leather carving: the history, styles, tools, and techniques, as well as valuable information on how to create patterns, how to refine and finalise your project.