Utensils, figurines, bas-reliefs, signs… the art of carving allows you to create these and many other works, using just a few tools and a steady hand. Wood carving with a knife or chisel is an ancient practice, almost as old as human civilization: after all, it requires a raw material that is really easy to find and the use of extremely simple tools, so it is no surprise that even primitive men engaged in this practice to create utensils and decorative objects.

If you have decided to embark on this journey, or if you need some advice to refine your skills, this guide is for you. We will explore together the most commonly used techniques for wood carving, the most suitable materials for each of them, and, above all, what the essential tools are for carving wood and how to use them.

The art of wood carving: the main techniques

Wood carving with a knife

Let’s start from the beginning: carving wood means removing – with the help of one or more tools – portions of wood from a starting block, to obtain the desired design or figure. Whether it is a full-round sculpture or a relief, the basic procedure is exactly the same. Naturally, depending on the object and the desired style, there are more or less suitable techniques and tools. Your level of experience will also guide your choice towards the most appropriate style, as well as the choice of wood: very hard woods, for example, are not suitable for beginners! But we will see more about this later.

The simplest and most immediate technique is knife carving, where you work directly with the blade on the wood, using different cutting styles. The “pull” cut is similar to peeling a fruit: you will pull the knife towards you in a slow and controlled motion, using your thumb to stop the blade. This cut is superficial, so the blade remains fairly parallel to the wood. The same applies to the “push” cut, where the blade is pushed outward instead. The “stop cuts,” or V-cuts, are those where the blade penetrates the wood vertically or at an angle, to create grooves and angles. The aesthetic effect given by this type of carving is of very faceted surfaces, rich in angles and chiaroscuro.

Relief carving is another very popular type of work. In this case, a flat and wide surface is used, from which the design is allowed to “emerge,” appearing framed. It is often used to create landscapes or regular decorative patterns, or for plaques and inscriptions. A bit more complex because it requires greater precision, it is usually the domain of those with a bit more experience. Our advice is to start with the drawing: trace the lines directly on the wood with a hard pencil and use them as a guide. Depending on the type of work, design, and wood, the operations may vary, but generally, you start with “stop cuts,” straight or V-shaped, along the lines of the drawing, or you rough out the lines with a chisel and mallet, then redefine edges and figures with precision work.

Full-round carving is what will allow you to achieve a result that is closest to sculpture, with complete figures and smooth, refined surfaces. The procedure, in this case, is also one of roughing out, to remove excess wood, shaping the form using carving or chisel blows, depending on the type of subject and the size of the wood, before proceeding with the actual sculpting work.

Hard wood or soft wood? How to choose the raw material

Wood carving with a chisel

As you can easily imagine, not all types of wood are suitable for all carving styles. Once you have decided in which artistic and technical direction you want to go, you will know whether to lean towards hard or soft wood. Also, the natural colour of the wood can be a deciding factor, because if you intend to paint your work, it is better to choose a light and porous one rather than a very dark one. Let’s see some tips on choosing the timber for your projects.

Soft wood is characterised by straight grain and a regular texture. Woods like Arolla pine, birch, basswood, or willow are accessible and reliable, making them an excellent choice for beginners. They are obviously particularly suitable for knife carving, unlike harder woods that excel in incisions and reliefs. Mahogany, for example, is among the most loved and sought after not only for its medium consistency, which makes it really easy to work with, but also for its appearance: its beautiful red colour does not require polishing or staining.

Other hard woods, suitable for work with a mallet and chisel, include black walnut, cherry wood, and white oak. For very elaborate work rich in details and decorations, fruit trees such as pear, apple, Italian walnut, and sycamore are often preferred.

Let’s talk about tools: knives and tools for wood carving

Selection of tools for wood carving

We started by saying that for carving you only need your hands, a piece of wood, and a knife. But the knife must be the right one! Moreover, depending on the type of carving you have decided to practice, you will need not only knives but also chisels and other useful tools, without ever forgetting safety gear!

Carving knife

The good thing is that there are really many available on the market, and they are quite affordable. A carving knife looks roughly like a normal kitchen knife, but with a shorter blade and a wide wooden handle for a good grip and comfortable working. The knife allows you to perform all the main carving operations, from the most superficial to deep cuts. It is ideal for soft woods like walnut or lime, but if you have the right experience and practice, you can use it with excellent results on harder woods.

Chisel

Another essential tool for wood carving is the chisel. It typically has a flat blade inserted into a tubular wooden handle, which facilitates gripping and is designed to receive and absorb the blows from the mallet. There are indeed many types of chisels on the market, with different sizes and characteristics, and they are almost always used in combination with the mallet, which allows you to direct and control the blow for carving.

Gouge

The gouge is a chisel with a circular or curved blade, whose cutting edge can be U-shaped, V-shaped, or spoon-shaped. The first type is mainly used on surfaces, while the others allow for digging into hard-to-reach points. Ideal for working on small surfaces, but also for roughing out the wood by sketching the lines that will then be refined.

Mallet

The mallet is the rounded hammer you will use to strike the blows on the chisel. It can be made of beech or maple, but there are also very good ones with a urethane head, a very durable material. The important thing is that the hammer is comfortable, as you will use it very often!

Does it seem difficult to choose among so many tools and you don’t know where to start? One solution is to start with a ready-made kit, which will provide you with everything you need to work. The Stubai 6 Gouges Kit, for example, brings together the essential gouges to take your first steps in the world of sculpture, while BeaverCraft sets, such as Comfort Bird or Love Spoon, are ideal for those who want to get familiar with the carving technique: they include a wood block and a guide to accompany you in the realisation of the project. The Deluxe wood sculpture kit, on the other hand, is for those who want to start carving wood independently, but with the assurance of having all the best tools in hand.

Other useful accessories

Finally, among the tools to have on hand, especially if your activity involves large pieces of wood, there is the vice, which will be used to hold the wood steady during work. The sharpening bench is essential for keeping the blades sharp: otherwise, they will struggle to glide and carve the wood smoothly. And don’t forget safety! Whether your work is for hobby and fun or carving is your profession, safety can never be overlooked. So always ensure you have protective gloves, as well as goggles and a mask, to avoid chips and dust in your eyes and throat.

Practical tips on wood carving

Wood carving - roughing with a chisel

It’s time to get started! Unless you are using a vice or a table support, you will have the wood in your hands. Hold it firmly and ensure that the tools you use have an ergonomic and comfortable grip, to avoid fatigue and also to give your hand maximum control in the work. If you are carving with a knife, use quick and decisive blows, without hesitation in the middle of the cut. If you are using the chisel, however, remove one portion at a time, trying to avoid pieces that are too large: the risk is damaging your base or even breaking it. Always try to follow the natural grain of the wood, especially if it is very hard and dense materials. If you are using softer woods, you can also proceed in the opposite direction.

Finishing: repairing, sanding, and varnishing carved wood

Finishing with Sandpaper

One of the most beautiful things about wood is that even in its natural state it has a warm and fascinating appearance: not only for its colour but also for the grains, knots, and growth rings that make each piece unique. Sometimes, however, there is a need to paint the wood, for aesthetic reasons but also to correct defects and small repairs. It can happen, in fact, that the wood gets damaged during carving: in this case, wood filler can be used, which can then be covered with a coat of varnish after carefully sanding the surface. In general, a pass with sandpaper is always recommended, unless you have chosen a carving with a faceted and rough effect, to eliminate roughness and leave the surface smooth and shiny. This operation is also an excellent preliminary step if you intend to paint the wood later, as it will allow the varnish to penetrate more deeply into the pores and grains of the wood.

At this point, all that’s left is to choose your tools, find the wood that suits you, and let your imagination run wild, to create objects, utensils, and beautiful decorations!