If you have followed our articles on the types of wax for various candles and on the equipment you need to create candles at home, we are finally ready for the final step, the one that will give you the most satisfaction: let’s go through the process of creating your beautiful candles together!

First of all: carefully prepare your workspace. Always keep in mind that pigment and dye stains, and even more so wax stains, are difficult to remove. The most commonly used environment for making candles is usually the kitchen: carefully cover all work surfaces. You can use newspaper on the table or the countertop you will be working on, but for the stove, use aluminium foil.

Keep everything you will need within reach: wax, containers to melt it, pigments, scents, wicks, scissors, pliers, moulds, thermometer, etc. (if you need a refresher on the various tools, read this article).

All set? Let’s get started!

The guided process to create your candles at home

Here is the step-by-step procedure to follow for the various types of candles.

If you are not sure which materials and tools to choose, take a step back and come back later, first read everything you need to know in articles part 1 and part 2.

Free-standing candles

  • First, position the wick, if you pre-wax it, it will be easier: just dip it for a moment in some melted wax and then lay it on parchment paper or aluminium, pulling it to keep it taut. Alternatively, you can use pre-cut and waxed wicks with a clip. Some moulds also have a metal needle to keep the wick taut. If you don’t know which wick to use, here you can find a guide to choosing the right wick.
  • Melt the wax and add the colour.
  • Finally, add the scent you have chosen. You should add scents according to weight percentages between 3 and 10% depending on the type of wax you use. For example, 6% of scent on 100 grams of wax will be 6 grams. As a general rule, you should add scents for candles at a temperature between 70 and 80°C. If added at higher temperatures, you might “burn” the fragrance compromising its final aroma, while if added at lower temperatures, you risk “sweating” the aroma which would compromise the proper combustion of the candle. Always check the flash point of the scent: in some cases, this could be at temperatures lower than 70°C. So how do you do it? You try: do tests to find the right compromise for the pouring temperature!
  • Pour the melted wax into the mould and let it cool. Here you can find indications on the pouring temperature.
  • As the wax cools, it shrinks, so you will see a dimple forming at the bottom of the mould. Take a bit more melted wax and fill the dimple that has formed. If you see excess wax, you can level it with a small knife.
  • Let it cool completely and remove the candle from the mould, using the part of the wick that protrudes. To make extraction easier, you can place the mould in the fridge for a few minutes.

Dipped candles

  • First, melt the wax. At what temperature? For candles with 60/40 beeswax: 70-73 °C. With 100% pure beeswax: about 75°C. With pure paraffin, a mixture of paraffin and stearin, or wax beads: 70-73 °C.
  • Dip the wick, kept very long, into the container of melted wax.
  • Then lift it to allow the wax to set.
  • Repeat the process many times until you reach the thickness you desire.
  • You will obtain conical, long, and narrow candles that, while the wax is still soft, you can also “twist” (that is, give it that typical spiral effect like a "corkscrew").

Carved candles

The starting base, or core, is a white candle with the wick kept rather long. Prepare a separate container with cold water and a container for each coloured layer.

  • Dip it into the coloured melted wax and immediately pull it out to immerse it in the cold water container.
  • Proceed like this for subsequent dips in the various colours until you achieve the number of layers you desire.
  • Use a sharp fixed-blade knife to carve the candle to reveal the different colours. Alternatively, you can use carving tools for wax.
  • The wax remains soft for quite a while: take advantage of this to bend and shape it according to your creativity.

Remember: if you do the final dip of your decorated or coloured candles in pure paraffin: the necessary pouring temperature will be 90°C.

wick candle procedure

Container candles

For paraffins or palm and soy waxes, you can use metal, rigid plastic, terracotta containers, and other types, while for gel wax, you can only use transparent containers that can withstand at least 80°C.

  • Properly position the wick in the container, securing the clip to the bottom with a drop of wax (even better if you use rigid pre-waxed wicks).
  • Melt the wax. Here you can find the indications for the correct pouring temperatures.
  • Add colour and scent and pour into the container.
  • Proceed slowly, pour a little wax at a time and let it cool a bit to keep the wick well positioned.
  • Complete the work paying particular attention to the shrinkage of the wax as it cools.
  • For gel wax, proceed with the same criteria, especially if you have placed objects in the container: it is important that they are well secured before you proceed with other layers.

How do I clean the tools and moulds?

Your best ally for removing wax residues and stains is heat. If you heat the wax residue, it melts and you can easily remove it with kitchen paper. If there are residues left in the mould, you can turn it upside down on a paper-lined rack and heat the outside with a hairdryer. The remaining wax will drip directly onto the paper. You can do the same with the pots or containers in which you melted the wax.

Important: do not reuse the pots you have used for wax for cooking.

If you have a double boiler or a specific stove, clean them periodically, and often replace or top up the water in the double boiler. If you have an electric thermostatic stove, always remember to unplug it before cleaning.

We have guided you on this journey to discover the materials and equipment necessary to make your candles, and we have seen the step-by-step procedure together: now all you have to do is unleash all your creativity and inspiration. And then try, try, try, until the result satisfies you!

Happy crafting and above all, have fun!